Expand Configuration and Management Manual (H06.21+, J06.10+)

Contents
Expand Configuration and Management Manual — 529522-013
vi
10. Configuring Expand-Over-X.25 Lines
Example 9-12
Step 3: Create the Line-Handler Process 9-12
ADD DEVICE Command 9-12
Considerations 9-16
Examples 9-16
Step 4: Start the Line-Handler Process 9-17
Step 5: Start the Line 9-17
Profile Modifiers 9-18
Recommended Modifiers 9-18
Modifiers for Special Features 9-19
PEXQSATM Modifiers 9-19
10. Configuring Expand-Over-X.25 Lines
Required Hardware and Software 10-2
X25AM Line-Handler Process 10-3
QIO Subsystem 10-3
Wide Area Network (WAN) Shared Driver 10-3
NonStop TCP/IP Process 10-3
Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 10-4
ServerNet Wide Area Network (SWAN) Concentrator 10-4
Topology Considerations 10-5
Summary of Configuration Steps 10-6
Step 1: Add a NAM Subdevice to the X25AM Line 10-7
Considerations 10-7
Step 2: Start the X25AM Line 10-7
Step 3: Create a Profile for the Expand-Over-X.25 Line-Handler Process 10-8
ADD Profile Command 10-8
Example 10-9
Step 4: Create the Expand-Over-X.25 Line-Handler Process 10-9
ADD DEVICE Command 10-9
Considerations 10-11
Examples 10-11
Step 5: Start the Expand-Over-X.25 Line-Handler Process 10-12
Step 6: Start the Expand-Over-X.25 Line 10-12
Profile Modifiers 10-13
Recommended Modifiers 10-13
Modifiers for Special Features 10-13
X25AM Line-Handler Process Modifiers 10-14
PEXQSNAM Modifiers 10-14