Expand Configuration and Management Manual (H06.21+, J06.10+)

Contents
Expand Configuration and Management Manual — 529522-013
vii
11. Configuring Expand-Over-SNA Lines
11. Configuring Expand-Over-SNA Lines
Required Hardware and Software 11-2
SNAX/APN Line-Handler Process 11-3
QIO Subsystem 11-3
Wide Area Network (WAN) Shared Driver 11-3
NonStop TCP/IP Process 11-4
Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 11-4
ServerNet Wide Area Network (SWAN) Concentrator 11-4
Topology Considerations 11-5
Summary of Configuration Steps 11-6
Step 1: Add the SNAX/APN Line 11-7
Considerations 11-7
Step 2: Add the LUs for the SNAX/APN Line 11-8
Considerations 11-8
Example 11-9
Step 3: Start the SNAX/APN Line 11-10
Step 4: Create a Profile for the Expand-Over-SNA Line-Handler Process 11-10
ADD Profile Command 11-10
Example 11-11
Step 5: Create the Expand-Over-SNA Line-Handler Process 11-11
ADD DEVICE Command 11-11
Considerations 11-13
Examples 11-13
Step 6: Start the Expand-Over-SNA Line-Handler Process 11-14
Step 7: Start the Expand-Over-SNA Line 11-14
Profile Modifiers 11-15
Recommended Modifiers 11-15
Modifiers for Special Features 11-15
PEXQSNAM Modifiers 11-16
12. Configuring Expand-Over-ServerNet Lines
Required Hardware and Software 12-2
Expand Manager Process ($ZEXP) 12-3
External System Area Network Manager (SANMAN) 12-3
Message Monitor Process (MSGMON) 12-3
Network Access Method (NAM) 12-3
Network Control Process ($NCP) 12-4
Cluster Switch 12-4
Profile Products 12-4