Expand Configuration and Management Manual (H06.21+, J06.10+)

Contents
Expand Configuration and Management Manual — 529522-013
viii
13. Configuring Multi-Line Paths
ServerNet Cluster Monitor Process ($ZZSCL) 12-4
ServerNet Cluster Product 12-5
Wide Area Network (WAN) Subsystem 12-5
X and Y Fabrics 12-5
Topology Considerations 12-6
Summary of Configuration Steps 12-7
Configuring a ServerNet Node 12-7
Step 1: Create a Profile for the Expand-Over-ServerNet Line-Handler Process 12-8
ADD Profile Command 12-8
Example 12-9
Step 2: Create a Device for the Expand-Over-ServerNet Line-Handler Process 12-9
ADD DEVICE Command 12-9
Considerations 12-11
Example 12-11
Step 3: Start the Expand-Over-ServerNet Line-Handler Processes 12-12
Example 12-12
Step 4: Start the Expand-Over-ServerNet Lines 12-12
Profile Modifiers 12-13
Modifiers for Special Features 12-13
PEXPSSN Modifiers 12-13
13. Configuring Multi-Line Paths
Configuration Overview 13-1
Configuration Considerations 13-2
Summary of Configuration Steps 13-3
Step 1: Create a Profile for the Path-Logical Device 13-3
ADD PROFILE Command 13-3
Step 2: Create a Profile for Each Line Type 13-4
ADD PROFILE Command 13-4
Step 3: Create a Path-Logical Device 13-6
ADD DEVICE Command 13-6
Considerations 13-7
Step 4: Create the Line-Logical Devices 13-8
ADD DEVICE Command 13-8
Considerations 13-13
Step 5: Start the Path-Logical Device 13-13
Step 6: Start the Lines 13-14
Starting Specific Lines 13-14
Configuration Example 13-15