Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-IP Lines

Expand Configuration and Management Manual — 529522-013

8 - 6

Asynchronous Transfer Mode (ATM) Subsystem

NonStop TCP/IP processes might interface to an IP network through the Asynchronous

Transfer Mode (ATM) subsystem. The ATM subsystem provides software that allows

NonStop TCP/IP processes to connect to an ATM ServerNet adapter (ATM3SA). You

must install the ATM3SA and configure and start the ATM subsystem before you can

start an Expand-over-IP line-handler process that uses this connection method.

For more information on the ATM subsystem, see the ATM Configuration and

Management Manual.

LAN or ATM Adapters or the CLIM

You can use a G4SA, an ATM3SA, or a CLIM to provide connectivity to an IP network.

The CLIM is an HP ProLiant class server configured as a communications device. It

provides Ethernet connectivity for J06.04 and later J-series RVUs on HP Integrity

NonStop BladeSystems.

For more information on the G4SA, see the LAN Configuration and Management

Manual. For more information on the ATM3SA, see the ATM Configuration and

Management Manual. For more information on the CLIM, see the Cluster I/O Protocols

(CIP) Configuration Management Manual.

Note. The CLIM hardware component is supported only on systems running J06.04 and later

J-series RVUs.