Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-IP Lines
Expand Configuration and Management Manual — 529522-013
8 - 31
Add a Configured Tunnel for an Expand Line for CIP
Example 8-15 shows how to add an Expand line from \NodeB to \NodeC.
Example 8-16 shows how to configure an Expand line using a tunnel for \NodeC.
Example 8-15. Add an Expand Line to \NodeC
allow all errors
abort line $giplco1
stop device $zzwan.#giplco1
delete device $zzwan.#giplco1
== Add profile of IP line
ADD PROFILE $zzwan.#afkslhip, file $data00.t9057afk.sippfr
== Add Expand line handler.
ADD DEVICE $ZZWAN.#giplco1, CPU 2, ALTCPU 3, PROFILE afkslhip,&
IOPOBJECT $data00.t9057afk.lhobj,TYPE (63,0), rsize 1, &
nextsys 102, associatedev $zsam0, &
ipver_ipv6, &
destipaddr 15.76.217.111, destipport 5050, &
srcipaddr 15.76.217.35 , srcipport 5050, &
v6srcipaddr 3FFE:A::A00:8EFF:FE03:812E, &
v6destipaddr 3FFE:B::A00:8EFF:FE00:897C
delay 2
info device $zzwan.#giplco1
start device $zzwan.#giplco1
Example 8-16. \NodeC: Configure an Expand-over-CIP Line Using a Tunnel
allow all errors
abort line $giplba1
stop device $zzwan.#giplba1
delete device $zzwan.#giplba1
== Add profile of IP line
ADD PROFILE $zzwan.#afkslhip, file $data00.t9057afk.sippfr
== Add Expand line handler.
ADD DEVICE $ZZWAN.#giplba1, CPU 2, ALTCPU 3, PROFILE afkslhip,&
IOPOBJECT $data00.t9057afk.lhobj,TYPE (63,0), rsize 1, &
nextsys 211, associatedev $zsam0, &
ipver_ipv6, &
destipaddr 16.107.186.66, destipport 5050, &
srcipaddr 16.107.187.84 , srcipport 5050, &
v6srcipaddr 3FFE:B::A00:8EFF:FE00:897C, &
v6destipaddr 3FFE:A::A00:8EFF:FE03:812E
delay 2
info device $zzwan.#giplba1
start device $zzwan.#giplba1