Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-IP Lines
Expand Configuration and Management Manual — 529522-013
8 - 35
PEXQSIP Modifiers
PATHTF 0 0 through 186
QUALITYTHRESHOLD 0 0 to 99
QUALITYTIMER 60 0 to 77600 (12hrs)
RETRYPROBE 19 1 through 255
RXWINDOW 7 2 through 15
SPEED 0 0 through 224000
SPEEDK NOT_SET 0 through 4,000,000,000
SRCIPADDR
2
0.0.0.0 Any 36-character string
SRCIPPORT
1
1024 0 through 65534
STARTUP_OFF 3
STARTUP_ON
SUPERPATH_OFF 3
SUPERPATH_ON
TIMERINACTIVITY 0 (no timer) 0 through 32767
TIMERPROBE 1 1 through 32767
TIMERRECONNECT 30 30 through 32767
TXWINDOW 7 2 through 25
V6DESTIPADDR 0000:0000:0000:
00
00:0000:0000:
0000:0000
Any 45-character string
V6SRCIPADDR 0000:0000:0000:
00
00:0000:0000:
0000:0000
Any 45-character string
1. This is a required modifier.
2. This is a required modifier. F
or IP address syntax, see the TCP/IPv6 Configuration and
Management Manual.
3. This is a required modifier. The default valu
e is invalid and must be changed.
4. The maximum value is actually 9180, but for performance it is best to use whole multiples
of 32, which would cause a 9152 maximum.
Table 8-1. PEXQSIP Modifiers for Expand-over-IP Lines (page 2 of 2)
Modifier Default Value Range of Values