Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual — 529522-013
9 - 16
Considerations
modifier_value
is the value you want to assign to the optional modifier specified by
modifier_keyword. modifier_value assigns a value to modifier_keyword
in the device record for this Expand line-handler process.
Default values and ranges of values for modifiers in the PEXQSA
TM profile are
described in
Profile Modifiers on page 9-18.
Considerations
•
Not all modifiers have associated values (for example, L4EXTPACKETS_ON).
•
The modifier_keyword and modifier_value parameters do not add the
specified modifier, or a modifier and its associated value, to the profile used by the
device. Use the ADD PROFILE command to add a modifier, or a modifier and its
associated value, to a profile.
Examples
In this example, a device named $ATMLIN1 is created for a single-line Expand-over-
ATM line-handler process that uses a permanent virtual circuit (PVC) connection.
-> ADD DEVICE $ZZWAN.#ATMLIN1, PROFILE SLHATM, IOPOBJECT &
$SYSTEM.SYSTEM.LHOBJ, CPU 0, ALTCPU 1, TYPE (63,0), RSIZE 0, &
PATHTF 3, NEXTSYS 251, ASSOCIATEDEV $ATM1, &
ASSOCIATESUBDEV #IP, CALLTYPE_PVC, PVCNAME PVC01
In the next example, the same device is created as part of a multi-CPU path. The
SUPERPATH_ON and L4EXTPACKETS_ON modifiers are required for line-handler
processes that are part of a multi-CPU path. The L4CONGCTRL_ON modifier is
recommended for Expand line-handler processes that are part of a multi-CPU path.
-> ADD DEVICE $ZZWAN.#ATMLIN1, PROFILE SLHATM, IOPOBJECT &
$SYSTEM.SYSTEM.LHOBJ, CPU 0, ALTCPU 1, TYPE (63,0), RSIZE 0, &
PATHTF 3, NEXTSYS 251, ASSOCIATEDEV $ATM1, &
ASSOCIATESUBDEV #IP, CALLTYPE_PVC, PVCNAME PVC01, &
14EXTPACKETS_ON, 14CONGCTRL_ON, SUPERPATH_ON
In the next example, a device named ATMLIN2 is created for a single-line Exp
and-
over-ATM line-handler process that uses an SVC connection.
-> ADD DEVICE $ZZWAN.#ATMLIN2, PROFILE SLHATM, IOPOBJECT &
$SYSTEM.SYSTEM.LHOBJ, CPU 0, ALTCPU 1, TYPE (63,0), RSIZE 0, &
PATHTF 3, NEXTSYS 251, ASSOCIATEDEV $ATM2, &
ASSOCIATESUBDEV #IP, CALLTYPE_SVC, ATMSEL 0, DESTATMADDR &
(ISONSAP:%H47000580FFE1000000F21A29EB0000000001B3)