Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual — 529522-013
9 - 20
PEXQSATM Modifiers
CALLTYPE_ATMSAP
4
COMPRESS_OFF
7
COMPRESS_ON 3
CONNECTTYPE_ACTIVEANDPASSIVE 3
CONNECTTYPE_PASSIVE
DESTATMADDR
2
(ISONSAP:
%H00...)
Any valid 20-byte ISO
NSAP ATM address
DOWNIFBADQUALITY_ON
DOWNIFBADQUALITY_OFF 3
EXTMEMSIZE 2048 0 through 32767
FRAMESIZE 132 64 through 2047
L2RETRIES 20 1 through 255
L4CONGCTRL_OFF
L4CONGCTRL_ON 3
L4CWNDCLAMP 32767 2000 through 2147483647
L4EXTPACKETS_OFF
L4EXTPACKETS_ON 3
L4RETRIES 3 3 through 255
L4SENDWINDOW 254 187 through 254
L4TIMEOUT 2000 50 through 32767
LIFNAME
5
None Any 8-character string
LINEPRIORITY 1 1 through 9
LINETF 0 0 through 186
MAXRECONNECTS 0 0 through 32767
NEXTSYS
5
255 0 to 254
OSSPACE 32767 3072 to 32767
OSTIMEOUT 300 10 to 32767
PATHBLOCKBYTES
6
0 0 through 9152 or 9180
(0 is recommended)
PATHPACKETBYTES 1024 0 through 9180
(9180 is recommended)
PATHTF 0 0 through 186
PVCNAME
3
None Any 8-character string
QUALITYTHRESHOLD 0 0 to 99
QUALITYTIMER 60
0 to 77600 (12hrs)
Table 9-1. PEXQSATM Modifiers for Expand-over-ATM Lines (page 2 of 3)
Modifier Default Value Range of Values