Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual — 529522-013
9 - 21
PEXQSATM Modifiers
RETRYPROBE 19 1 through 255
RXWINDOW 7 2 through 15
SPEED 0 0 or 1200 through 224000
SPEEDK NOT_SET 0 through 4,000,000,000
STARTUP_OFF 3
STARTUP_ON
SUPERPATH_OFF 3
SUPERPATH_ON
TIMERPROBE 1 1 through 32767
TIMERRECONNECT 30 30 through 32767
TXWINDOW 7 2 through 25
1. This is a required modifier.
2. This modifier is required for Expand-over-ATM line-handler processes that use SVC connections.
3. This modifier is required for Expand-over-ATM line-handler processes that use PVC connections.
4. This modifier is required for Expand-over-ATM l
ine-handler processes that use ATMSAP connections.
5. This is a required modifier. The default value is invalid and must be changed.
6. The maximum value is actually 9180, but for performance it is best to use whole multiples of 32, which would
cause a 91
52 maximum.
7. Although the default value is COMPRESS_ON, we recommend that you turn it off for ATM.
Table 9-1. PEXQSATM Modifiers for Expand-over-ATM Lines (page 3 of 3)
Modifier Default Value Range of Values