Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-SNA Lines
Expand Configuration and Management Manual — 529522-013
11 - 1 6
PEXQSNAM Modifiers
For configuration considerations for these features, see Section 17, Subsystem
Description. For more information on the advantages and disadvantages of these
features, see Section 3, Planning a Network Design.
The PATHBLOCKBYTES, PATHPACKETBYTES, L4CONGCTRL_ON,
SUPERPATH_ON, and L4CWNDCLAMP modifiers are described in detail in
Section 16, Expand Modifiers.
PEXQSNAM Modifiers
The disk file $SYSTEM.SYSnn.PEXQSNAM defines modifiers for Expand-over-SNA
line-handler processes.
Table 11-1 lists the default value and range of values for each modifier in this profile, if
applicable. For modifiers that are mutually exclusive, a check mark (3) is shown in the
“Default Value” column to indicate which modifier is present in the profile. For a
complete description of the modifiers listed in this table, see Section 16, Expand
Modifiers.
Table 11-1. PEXQSNAM Modifiers for Expand-over-SNA Lines (page 1 of 2)
Modifier Default Value Range of Values
AFTERMAXRETRIES_DOWN
AFTERMAXRETRIES_PASSIVE 3
ASSOCIATEDEV
1
Any 8-character string
ASSOCIATESUBDEV
1
Any 8-character string
COMPRESS_OFF
COMPRESS_ON 3
CONNECTTYPE_ACTIVEANDPASSIVE 3
CONNECTTYPE_PASSIVE
EXTMEMSIZE 2048 0 through 32767
FRAMESIZE 132 64 through 2047
L2RETRIES 10 1 through 255
L4CONGCTRL_OFF 3
L4CONGCTRL_ON
L4CWNDCLAMP 32767 2000 through 2147483647
L4EXTPACKETS_OFF
L4EXTPACKETS_ON 3
L4RETRIES 3 3 through 255
L4SENDWINDOW 254 187 through 254
L4TIMEOUT 2000 50 through 32767
LINEPRIORITY 1 1 through 9