Expand Configuration and Management Manual (H06.21+, J06.10+)

Contents
Expand Configuration and Management Manual — 529522-013
xix
B. Expand and WAN SCF Comparison
B. Expand and WAN SCF Comparison
Command Comparison B-1
ALTER Command Comparison B-7
Modifier-to-Attribute Comparison B-7
Altering Timeout Periods B-8
Glossary
Index
Examples
Example 1-1. SCF STATUS ADAPTER Command 1-7
Example 1-2. SCF INFO ADAPTER Command 1-8
Example 1-3. SCF STATUS PROCESS Command 1-9
Example 6-1. SCF STATUS $NCP Command 6-4
Example 7-1. SCF STATUS ADAPTER Command 7-6
Example 8-1. SCF LISTDEV TCPIP Command 8-9
Example 8-2. SCF INFO SUBNET Command 8-10
Example 8-3. SCF INFO SUBNET, DETAIL Command 8-12
Example 8-4. SCF LISTDEV TCPIP Command 8-13
Example 8-5. SCF LISTDEV TCPIP Command 8-15
Example 8-6. SCF INFO SUBNET $ZSAM0 8-16
Example 8-7. SCF STATUS PROCESS Command 8-17
Example 8-8. SCF STATUS MON Command 8-19
Example 8-9. SCF LISTOPENS MON Command 8-20
Example 8-10. \NodeB: Configure an Expand-over-TCP/IPv6 Line Using Configured-
Tunnel 8-28
Example 8-11. Add an Expand Line to \NodeC 8-29
Example 8-12. \NodeC: Configure an Expand-over-NonStop TCP/IPv6 Line Using
Configured-Tunnel 8-29
Example
8-13. Add an Expand Line to \NodeB 8-30
Example 8-14. TACL Macro \NodeB: Configure an Expand-over-CIP Line With a
Tunnel 8-30
Example
8-15. Add an Expand Line to \NodeC 8-31
Example 8-16. \NodeC: Configure an Expand-over-CIP Line Using a Tunnel 8-31
Example
8-17. Add an Expand Line to \NodeB 8-32
Example
9-1. SCF INFO PVC Command 9-6
Example
9-2. ATM Subsystem SCF INFO LINE, DETAIL Command 9-7
Example
9-3. Expand Subsystem SCF INFO LINE, DETAIL Command for
SVC 9-8