Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Expand-Over-ServerNet Lines
Expand Configuration and Management Manual — 529522-013
12 - 8
Step 1: Create a Profile for the Expand-Over-
ServerNet Line-Handler Process
Step 1: Create a Profile for the Expand-Over-
ServerNet Line-Handler Process
You can create a profile for the Expand-over-ServerNet line-handler processes using
the PEXPSSN profile. This profile is provided in the $SYSTEM.SYSnn subvolume. You
can also create a new profile from an existing profile, or you can create your own
profile. For complete information about profiles, see the WAN Subsystem Configuration
and Management Manual.
This subsection shows you how to create a profile using PEXPSSN.
ADD Profile Command
To create a profile from the PEXPSSN profile template, use the WAN subsystem SCF
ADD PROFILE command. The command syntax is:
$ZZWAN.profile_name
specifies, via the WAN subsystem, a user-defined name of up to eight
alphanumeric characters that will be used to identify the new profile. You will
reference this profile_name when you create devices for the Expand-over-
ServerNet line-handler processes in Step 2: Create a Device for the Expand-Over-
ServerNet Line-Handler Process.
FILE $SYSTEM.SYSnn.profile_filename
specifies the name of an existing disk file that will be used to create the new
profile. PEXPSSN is the disk filename of the profile provided for Expand-over-
ServerNet line-handler processes.
modifier_keyword
is the name of a modifier in profile_name. Modifier names in the PEXPSSN
profile are listed in Profile Modifiers on page 12-13.
modifier_value
is the value you want to assign to the modifier specified by modifier_keyword.
Specifying a modifier_value assigns a new value to modifier_keyword in
profile_name. Default values and ranges of values for modifiers in the
PEXPSSN profile are described in
Profile Modifiers on page 12-13.
ADD PROFILE $ZZWAN.#profile_name
, FILE $SYSTEM.SYSnn.profile_filename
[, modifier_keyword [ modifier_value ] ] ...