Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Multi-Line Paths
Expand Configuration and Management Manual — 529522-013
13 - 5
ADD PROFILE Command
specifies, via the WAN subsystem, a user-defined name of up to eight
alphanumeric characters that will be used to identify the new profile. You will
reference this profile_name when you create the device for the line in Step 4:
Create the Line-Logical Devices.
FILE $SYSTEM.SYSnn.diskfile_name
specifies the name of an existing disk file that will be used to create the new
profile. Table 13-1 lists the disk filenames that are provided for line-logical devices.
These disk files are installed in $SYSTEM.SYSnn.
modifier_keyword
is the name of a modifier in profile_name. Modifier names in the line-logical
device profiles are listed in Line-Logical Device Modifiers on page 13-18.
modifier_value
is the value you want to assign to the modifier specified by modifier_keyword.
Specifying a modifier_value assigns a new value to modifier_keyword in
profile_name. Default values and ranges of values for modifiers in the line-
logical device profiles are described in Line-Logical Device Modifiers on
page 13-18
.
Table 13-1. Profiles for Line-Logical Devices
Disk Filename Type of Line-Logical Device
PEXQMSWN Direct-connect
PEXQMSAT Satellite-connect
PEXQMNAM Expand-over-NAM
PEXQMIP Expand-over-IP
PEXQMATM Expand-over-ATM