Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Multi-Line Paths
Expand Configuration and Management Manual — 529522-013
13 - 13
Considerations
Required Modifiers for Expand-Over-NAM Lines
ASSOCIATEDEV $nam_process
is a required modifier that specifies the device name of the X25AM line-handler
process or SNAX/APN line-handler process you want to associate with this
Expand-over-X.25 or Expand-over-SNA line.
ASSOCIATESUBDEV #subdevice
is a required modifier that specifies the name of an X25AM subdevice to which the
Expand-over-X.25 line-handler process will bind or the subdevice name of the
SNAX/APN logical unit (LU) used by the Expand-over-SNAX line-handler process.
Configuring X25AM subdevices is explained in Step 1: Add a NAM Subdevice to
the X25AM Line on page 10-7. Configuring a SNAX/APN LUs is explained in Step
2: Add the LUs for the SNAX/APN Line on page 11-8.
Considerations
•
Not all modifiers have associated values (for example, CLOCKMODE_DCE).
•
The modifier_keyword and modifier_value parameters do not add the
specified modifier, or a modifier and its associated value, to the profile used by the
device. Use the ADD PROFILE command to add a modifier, or a modifier and its
associated value, to a profile.
Step 5: Start the Path-Logical Device
To start the path-logical device, use the WAN subsystem SCF START DEVICE
command. When you use this command on the path-logical device, the line-logical
devices associated with the path are also started. The command syntax is:
$ZZWAN.#device_name
specifies, via the WAN subsystem, the path-logical device name or a line-logical
device name.
This command creates a process for the specified p
ath-logical device or line-logical
device and allocates one logical device (LDEV) number for the logical-path device and
one LDEV number for each logical-line device.
START DEVICE $ZZWAN.#device_name