Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuring Multi-Line Paths

Expand Configuration and Management Manual — 529522-013

13 - 20

PEXQMNAM Modifiers

The disk file $SYSTEM.SYSnn.PEXQMNAM defines modifiers for Expand-over-NAM

lines in multi-line paths. Table 13-5 lists the default value and range of values for each

modifier in this profile, if applicable. For modifiers that are mutually exclusive, a check

mark (3) is shown in the “Default Value” column to indicate which modifier is present in

the profile.

Table 13-5. PEXQMNAM Modifiers

Modifier Default Value Range of Values

AFTERMAXRETRIES_DOWN

AFTERMAXRETRIES_PASSIVE 3

ASSOCIATEDEV

Any 8-character string

ASSOCIATESUBDEV

Any 8-character string

CONNECTTYPE_ACTIVEANDPASSIVE 3

CONNECTTYPE_PASSIVE

FRAMESIZE 132 64 through 2047

L2RETRIES 10 1 through 255

LINEPRIORITY 1 1 through 9

LINETF 0 0 through 186

MAXRECONNECTS 0 0 through 32767

RETRYPROBE 20 1 through 255

RXWINDOW 7 2 through 15

SPEED 0 0 or 1200 through 224000

SPEEDK NOT_SET 0 through 4,000,000,000

STARTUP_OFF 3

STARTUP_ON

TXWINDOW 7 2 through 61

1. This is required modifier. It has no default value.