Expand Configuration and Management Manual (H06.21+, J06.10+)

Expand Configuration and Management Manual — 529522-013
14 - 1
14
Subsystem Control Facility (SCF)
Commands
This section describes the Subsystem Control Facility (SCF) interface to the Expand
subsystem and provides SCF command syntax. For general information about running
SCF, see the SCF Reference Manual for H-Series RVUs.
Topics described in this section include:
•
Overview of the Expand Subsystem SCF Interface on page 14-2
•
SCF and the WAN Subsystem on page 14-7
•
SCF and the SLSA Subsystem on page 14-8
•
ABORT Command on page 14-8
•
ACTIVATE Command on page 14-9
•
ALTER Command on page 14-10
•
ALTER DEVICE Command on page 14-10
•
ALTER PATH Command on page 14-11
•
ALTER LINE Command on page 14-12
•
ALTER PROCESS Command on page 14-21
•
DELETE ENTRY Command on page 14-23
•
INFO Command on page 14-24
•
INFO PATH Command on page 14-25
•
INFO LINE Command on page 14-31
•
INFO PROCESS Command on page 14-50
•
PRIMARY PROCESS Command on page 14-70
•
PROBE PROCESS Command on page 14-71
•
START Command on page 14-73
•
STATS Command on page 14-74
•
STATS PATH Command on page 14-74
•
STATS PATH NODE Command on page 14-81
•
STATS PROCESS Command on page 14-97
•
STATUS Command on page 14-101
•
STATUS PATH Command on page 14-101
•
STATUS LINE Command on page 14-103
•
STOP Command on page 14-111
•
TRACE Command on page 14-112
•
VERSION Command on page 14-117
•
VERSION PROCESS Command on page 14-118