Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 18
Considerations
TIMERRECONNECT time
specifies the time interval that the Expand-over-NAM, Expand-over-ATM, Expand-
over-IP, or Expand-over-ServerNet line-handler process will wait for a connection
request to succeed. The range does not include 0. The time interval is specified in
the format described in Time Values on page 14-6.
Expand line-handler processes on opposite ends of an X25AM line should use
different values for TIMERRECONNECT.
The valid range for this attribute is 30.00 through 32767 seconds for Expand-over-
IP and Expand-over-ATM lines and 0 through 32767 seconds for Expand-over-
NAM and Expand-over-ServerNet lines.
The default value for this attribute is 30.00 seconds for Expand-over-NAM,
Expand-over-ATM lines, and Expand-over-IP lines, and 60.00 seconds for Expand-
over-ServerNet lines.
Considerations
•
You can alter several lines with a single ALTER command by specifying multiple
LINE objects using parentheses as:
-> LINE ( line-name , line-name [ , line-name ] ... )
•
Except for LINEPRIORITY and DELAY changing any other object attribute requires
the lines to be in STOPPED state.
Expand-over-X.25 lines: 300
Expand-over-SNA lines: 300
Expand-over-ServerNet lines: 30