Expand Configuration and Management Manual (H06.21+, J06.10+)

Contents
Expand Configuration and Management Manual — 529522-013
xxv
Tables
Table 18-5. Subtype Values for Multi-Line Paths (Path and Line Logical
Devices) 18-16
Table 18-6. WAN SCF Commands for Expand Line-Handler Process
Information 18-16
Table 18-7. Expand SCF Commands for Line Information 18-17
Table 18-8. Expand SCF Commands for Path Information 18-18
Table 18-9. Expand SCF Commands for Tracing 18-19
Table 18-10. Expand SCF Status Commands 18-22
Table 18-11. Expand SCF Control Commands 18-27
Table 18-12. Expand SCF Commands for Switching Processors 18-28
Table 19-1. Performance Factors 19-2
Table 19-2. Data-Per-Packet Percentages 19-9
Table 19-3. Summary of Tuning Strategies 19-21
Table 20-1. LISTDEV TYPE Identifiers 20-2
Table 20-2. Verifying Processes Using the SCF LISTDEV Command 20-4
Table 20-3. Identifying Problems With Expand Subsystem SCF Commands 20-5
Table 20-4. Common File-System Errors 20-7
Table 20-5. Network Problem Check List 20-10
Table 20-6. Identifying $NCP Problems With SCF Commands 20-11
Table 20-7. Expand Line-Handler Process Problem-Resolution Procedures 20-12
Table 20-8. SWAN Concentrator Problem-Resolution Check List 20-13
Table 20-9. WAN Subsystem Problem-Resolution Check List 20-15
Table 20-10. Expand-Over-X.25 Problem-Resolution Procedures 20-18
Table 20-11. Detailed States (Expand-Over-IP) 20-19
Table 20-12. Messages Displayed in the Detailed Info Field
(Expand-Over-IP) 20-22
Table
20-13. Messages and Corresponding Event Numbers 20-23
Table 20-14. Detailed States (Expand-Over-ATM) 20-24
Table 20-15. Messages Displayed in the Detailed Info Field (Expand-Over-
ATM) 20-27
Table
20-16. Multi-CPU Path Problem Resolution Procedures 20-28
Table 20-17. SCF Commands to Locate a “Downed” Path 20-34
Table
B-1. Expand and WAN SCF Command Comparison B-1