Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 37
Expand-Over-IP Line-Handler Processes
Aftermaxretries
is the line state after retries have been exhausted for the line. DOWN means the
line state will be down. PASSIVE means the Expand-over-IP process will issue
passive connect requests.
Example
14-7 shows the display format for a LINE object with the DETAIL option for
Expand-over-IP line-handler processes for IPv4 lines. The asterisk (*) ind
icates an
alterable attribute.
Example 14-8 on page 14-38 shows the display format for a LINE object with the
DETAIL option for Expand-over-IP line-handler processes for IPv6 lines. The asterisk
(*) indicates an alterable attribute.
Note IPv6 display format is the same as the IPv4 display format. If the IPv6 addresses
are not set, they are displayed as :: (two colons).
Example 14-7. INFO LINE, DETAIL Command, Expand-Over-IP Line-Handler
Processes for IPv4 Lines
-> INFO LINE $IPTAH0, DETAIL
EXPAND Detailed Info LINE $IPTAH0 (LDEV 175)
L2Protocol Net^Ip TimeFactor...... 3 *SpeedK........ NOT_SET
Framesize....... 132 -Rsize........... 3 -Speed........
*LinePriority.... 1 StartUp......... OFF *Delay......... 0:00:00.10
*DownIfBadQuality OFF *QualityThreshold 96 *QualityTimer.. 0:01:00.00
*Txwindow........ 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:00:30.00 *Retryprobe...... 19 *Timerprobe.... 0:00:01.00
*Associatedev.... $ZTC02 *LineTf.......... 0 *Timerinactivity 0:00:00.00
*IPVer IPV4
*DestIpAddr 16.107.189.66 *DestIpPort...... 5744
*SrcIpAddr 16.107.188.54 *SrcIpPort....... 5744
*V6DestIpAddr ::
*V6SrcIpAddr ::