Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 46
Expand-Over-NAM and Expand-Over-ServerNet
Line-Handler Processes
Expand-Over-NAM and Expand-Over-ServerNet Line-Handler
Processes
For Expand-over-NAM and Expand-over-ServerNet line-handler processes, the display
for a LINE object without the DETAIL option has the format as shown in
Example 14-12. The asterisk (*) indicates an alterable attribute.
Name
is the device name of the line.
Delay
specifies the time interval, in one-hundredth of a second increments, that a data bit
spends on the line during message transmission. The line-handler process uses
the transmission size, the amount of delay before the message can be dispatched,
and the DELAY modifier value to select the most efficient line for data transmission
within a path that consists of multiple line logical devices.
Framesize
specifies the maximum size frame that can be sent in the network; smaller frames
can be sent. The Expand subsystem also uses the FRAMESIZE modifier value to
calculate the packet size. The FRAMESIZE modifier value also determines the size
of the frame buffers.
L2Timeout
reports the time interval of the Layer 2 T1 timer.
Associatedev
reports the name of the X25AM or SNAX/APN process associated with the
Expand-over-NAM process. For Expand-over-ServerNet line-handler processes,
this field shows $ZZSCL.
Associatesubdev
reports the name of the NAM subdevice that will be activated by the Expand-over-
NAM process. The subdevice name for Expand-over-X.25 line-handler processes
is the name of an X25AM subdevice. For Expand-over-SNA line-handler processes
Example 14-12. INFO LINE Command, Expand-Over-NAM and Expand-Over-
ServerNet Line-Handler Processes
-> INFO LINE $SC151
EXPAND Info LINE
Name Delay Framesize *L2Timeout *Associatedev *Associatesubdev
$SC151 0:00:00.10 132 0:00:01.00 $ZZSCL