Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 49
Expand-Over-NAM and Expand-Over-ServerNet
Line-Handler Processes
Expand-over-ServerNet line-handler processes that have the MAXRECONNECTS
modifier set to a nonzero value.
Timerreconnect
specifies the time interval that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will wait for a connection request to succeed. For a
description of the time interval format, see Time Values on page 14-6.
Retryprobe
reports the number of times that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will retry its probe of the NAM before deciding that the
network is unavailable.
Timerprobe
specifies the time interval that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will wait to obtain the status of the NAM process. For a
description of the time interval format, see Time Values on page 14-6.
Associatedev
reports the name of the X25AM or SNAX/APN process associated with the
Expand-over-NAM process. For Expand-over-ServerNet line-handler processes,
this field shows $ZZSCL.
Associatesubdev
reports the name of the NAM subdevice that will be activated by the Expand-over-
NAM process. The subdevice name for Expand-over-X.25 line-handler processes
is the name of an X25AM subdevice. For Expand-over-SNA line-handler
processes, it is the name of a SNAX/APN logical unit (LU). This field is not used by
Expand-over-ServerNet line-handler processes.
Timerinactivity
specifies the time interval that an Exp
and-over NAM (i.e., Expand-over-X.25 or
Expand-over-SNA) line-handler process will wait during a period of inactivity before
requesting disconnection from the network service provided by the NAM process.
For a description of the time interval format, see Time Values on page 14-6.
Timerinactivity does not apply to Exp
and-over-ServerNet line-handler processes.
Connecttype
lists the Layer 2 Expand-over-NAM or Expand-over-ServerNet line-handler process
connect type. ACTIVEANDPASSIVE causes the network access method (NAM) to
first issue a call request and, if unsuccessful, wait for an incoming call request.
PASSIVE causes the NAM to wait for incoming call requests; it will not initiate
connect requests.