Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 57
CONNECTS Option
RebalThreshold
specifies the threshold time for auto-rebalance. It also helps to enable and disable
auto-rebalance. RebalThreshold can have the following values:
•
-1, the auto-rebalance is switched off and the user must manually trigger
rebalance.
•
0, the auto-rebalance occurs normally without taking into cognizance this
modifier value.
•
Greater than 0, the auto-rebalance occurs if the path has revived after being
down beyond the time period mentioned in this modifier.
AutoRebalTime
reports the time interval for automatic rebalancing of the multi-CPU paths on the
system. Rebalancing will occur periodically at the time interval shown. The time
interval is displayed in the format described for the Next Rebalance Time
attribute.
Trace File Name
the name of the trace file specified in the SCF TRACE command.
CONNECTS Option
The INFO PROCESS $NCP CONNECTS option displays the systems that are
connected or connecting, and only the entry for which the connection is established. If
the path is a multi-CPU path (superpath), the CONNECTS option displays all the paths
in the multi-CPU path. It is basically a summary of the NETMAP command, but shows
only the connected entries.
System
indicates the number and the name of the system, or node.
Example 14-16. INFO PROCESS $NCP Command, CONNECTS Option
-> INFO PROCESS $NCP, CONNECTS
EXPAND Info PROCESS $NCP, CONNECTS
CONNECTS AT \NODEA (117) #LINESETS=7 TIME: FEB 24,2003 13:55:29
System Time(Dist) Lset:LHname (Ldev) Lset:LHname (Ldev)
82 \NODEB 1(01) 1:$SPATH1 ( 122)& 2:$SPATH0 ( 123)&
3:$SPATH2 ( 121)*
123 \NODEC 4(02) 3:$SPATH2 ( 121)*
160 \NODED 4(02) 5:$IPTAH1 ( 125)+
254 \NODEE 7(03) 1:$SPATH1 ( 122)*