Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 64
OBEYFORM Option
TF
indicates time factors in this display.
If you are using the OLDNETMAP option on a G06.20 node, the command INFO
PROCESS $NCP, LINESET, AT \remote, where \remote is a G06.19 node,
displays super time factor information, and the command INFO PROCESS $NCP,
OLDLINESET, AT \remote displays non-super time factor information.
PID
is the process ID.
LINE
indicates the device name of a line.
LDEV
indicates the logical device (LDEV) number associated with each line logical
device.
STATUS
indicates the status of the line: ready or not ready.
FileErr#
is the last file-system error returned for the path. For recovery information on file
errors, see Identifying Network Problems on page 20-3.
OBEYFORM Option
The output is in the form of an ALTER PROCESS command. This allows for easy
creation of SCF command files for configuration backup.
Example 14-19. INFO PROCESS $NCP, OBEYFORM command
ALTER PROCESS $NCP ,&
AUTOREBAL OFF ,&
AUTOREBALTIME 1/00:00:00 ,&
REBALTHRESHOLD 0 ,&
MSG43 OFF ,&
MSG46 OFF ,&
MSG48 OFF ,&
MSG49 OFF ,&
CONNECTTIME 0:00:00.00 ,&
ABORTTIMER 0:02:30.00 ,&
MAXTIMEOUTS 3 ,&
MAXCONNECTS 5 ,&
NETWORKDIAMETER 15