Expand Configuration and Management Manual (H06.21+, J06.10+)

What’s New in This Manual
Expand Configuration and Management Manual — 529522-013
xxx
Changes to the J06.04 Manual (529522-007 Edition)
•
Added Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) on
page 10-4 for customer feedback.
•
Corrected minor typographical errors throughout.
Changes to the J06.04 Manual (529522-007 Edition)
•
Added the term, NonStop BladeSystems, in About This Manual on page xxxiii.
•
Updated the description of Cluster I/O Protocols (CIP) Configuration and
Management Manual on page xxxviii.
•
References to Release Version Updates (RVUs) throughout this manual have been
updated to include references to J-series RVUs, where appropriate.
•
Added the following terms in the Abbreviations list:
°
CIP.
°
CLIM.
°
$$ZCIP.
•
Added the subsystem name, CIP in Expand-Over-IP Line-Handler Process on
page 1-10.
•
Updated the tcpip_process parameter in Table 1-4 on page 1-11.
•
Added the cipsam_process parameter in Table 1-4 on page 1-12.
•
Updated information about Internet Protocol (IP) Networks on page 3-5.
•
Updated the hardware and software components in Required Hardware and
Software on page 8-2.
•
Added CIP Process on page 8-4.
•
Updated the description of Redundancy in Ethernet Adapters on page 8-4.
•
Added a note on CIP subsystem in Local Area Network (LAN) Driver and Interrupt
Handlers (DIHs) on page 8-5.
•
Added the description of CLIM in LAN or ATM Adapters or the CLIM on page 8-6.
•
Added the following configuration steps for CIP subsystem:
°
Step 1 (C): Select a Process and SUBNET for CIP Use
°
Step 2 (C): Identify an available UDP Port Number for CIP Use
•
Updated the description of the following syntax terms of the ADD DEVICE
command:
°
CPU cpunumber
°
ALTCPU altcpunumber