Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 89
Expand-Over-ServerNet, Expand-Over-X.25, and
Expand-Over-SNA Line-Handler Processes
Line Quality
is the line-quality value computed every 500 frames. This value is not alterable.
Line quality is computed using this formula:
100 * (( TOTAL FRAMES - ERROR FRAMES ) / TOTAL FRAMES)
Line Quality report
s a value below 100 only when the result of the formula is
95 or less; that is, when less than 95 percent of the packets are error-free.
Low line quality generally indicates a Layer 2 problem. For Layer 2 troubleshooting
information, see Section
20, Troubleshooting.
Expand-Over-ServerNet, Expand-Over-X.25, and Expand-Over-
SNA Line-Handler Processes
For Expand-over-ServerNet, Expand-Over-X.25, and Expand-Over-SNA line-
handler processes, the display for a LINE object has the format as shown in
Example
14-29.
PPID
is the primary process ID.
BPID
is the backup process ID.
Resettime
is the last time the statistics counters were reinitialized.
Example 14-29. STATS LINE Command, Expand-Over-ServerNet Line-Handler
Processes
-> STATS LINE $SNSLQ3
EXPAND Stats LINE $SNSLQ3, PPID ( 2, 29), BPID ( 3, 58)
Resettime... JUN 09,2000 12:15:33 Sampletime... JUN 09,2000 12:48:11
Bind Aconn Pconn Query Disc
MsgSent 4 4 0 32 0
RepRecv 4 4 0 32 0
MsgTout 0 0 0 0 0
ErrRecv 0 0 0 0 0
LastErr 0 0 0 0 0
Unbind Data Notif Data
MsgSent 4 1399463 MsgRecv 0 1364604
RepRecv 4 1399460 RepSent 0 1364604
MsgTout 0 0 ErrSent 0 0
ErrRecv 0 1 LastErr 0 0
LastErr 0 160
Proc lookup failures 0 Inactivity timeouts 0