Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 91
SWAN Concentrator Lines
notifies the linehandler of any process changes on the remote system or the
connection (such as if the phandle changes).
Data
indicates the number of data frames received. Normal ServerNet traffic is not
counted here because normal data traffic by-passes the line handler for these
processes.
Proc lookup failures
process lookup failures indicate the number of failures to see the associate device.
Inactivity timeouts
indicates how many timeouts there were because of inactivity. Used for Expand-
over-X25 and Expand-over-SNAX.
SWAN Concentrator Lines
For Expand line-handler processes using ServerNet wide area network (SWAN)
concentrators, the display for a LINE object has the format shown in Example 14-30:
PPID
is the primary process ID.
Example 14-30. STATS LINE Command, SWAN Concentrator Lines
-> STATS LINE $SWNLCW1
EXPAND Stats LINE $SWNLCW1, PPID ( 2, 20), BPID ( 3, 21)
Resettime... JUN 12,2000 09:29:43 Sampletime... JUN 13,2000 15:31:47
---------------- LEVEL 2 ------------------
I-Frames S-Frames U-Frames
Sent 227 890 9
Rcvd 220 898 9
------------------------ LEVEL 2 DETAIL -----------------------------------
SABM DISC UA DM CMDR RR
Sent 7 0 0 2 0 890
Rcvd 1 1 1 6 0 898
RNR REJ SREJ I-FRM I-FRM(P)
Sent 0 0 0 227 0
Rcvd 0 0 0 220 0
---------------------------- DRIVER ----------------------------------------
Total Frms.. 2000 Line Quality.. 100 No Buffer... 0
Err Frms.... 0 BCC Errs...... 0 Modem Errs.. 0
Rcv OverRun +0
------------------------- CLIP SPECIFIC ------------------------------------
FCS Errs.... 0 Addr Errs..... 0 Length Errs. 0
Rcv Abort... 0 Timeout....... 5 No Buffer... 0
CTS State... OFF DSR State..... OFF DCD State... ON