Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 93
SWAN Concentrator Lines
SAMB
specifies set asynchronous balanced mode.
DISC
specifies disconnect.
UA
specifies unnumbered acknowledgment frame counts.
DM
specifies disconnect mode.
CMDR
specifies command reject frame counts.
RR
specifies receive ready frames.
RNR
specifies receive not ready frames.
REJ
specifies reject frames.
SREJ
specifies selective reject frames. These apply only to satellite-connect lines.
I-FRM
specifies information frames.
I-FRM(P)
specifies information frames with poll bit frame count
s.
DRIVER
displays the counters used to account for errors in received frames. The driver
counters apply only to the link between the input-output process (IOP) and the
communications line interface processor (CLIP), that is, the CLB.
Total Frms
is the total number of frames that have been transmitted and received between
the communications access process (CAP) and the CLIP because THRESHOLD