Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 97
STATS PROCESS Command
STATS PROCESS Command
The STATS PROCESS command displays statistical information about the network
control process ($NCP).
Depending on the option you choose, the STATS command for $NCP displays these
statistics information:
•
Detailed packet statistics that represent the communications occurring between
two specified systems in the network
•
Aggregate packet statistics occurring at the specified system
The STATS command for the network control process has this syntax:
/ OUT file-spec /
causes any SCF output generated for the command to be directed to the specified
file.
{ NETFLOW | LOCALFLOW }
NETFLOW displays packet statistics that represent the communications occurring
between two specified systems in the network.
LOCALFLOW displays aggregate packets statistics occurring at the specified
systems.
AT { system-list | * }
where
system-list
is ( [ sys-a [ , sys-b [ , sys-c [ , .... ]]]] ).
sys-a
is { \system-name | system-number }.
sys-b
is { \system-name | system-number }.
sys-c
is { \system-name | system-number }.
STATS [ / OUT file-spec / ] PROCESS $NCP
[ , { NETFLOW | LOCALFLOW } ]
[ , AT { system-list | * } ]
[ , TO { system-list | * } ]