Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 99
STATS PROCESS Command
The resulting display has the format as shown in Example 14-31 (example display of
$NCP statistics with NETFLOW option):
Sampletime
is the last time that the STATS command was performed.
NETWORK STATISTICS AT \N1 (003)
is the name and number of the system from which the network is viewed.
SYSTEM
lists the system numbers and names that communicated with the system specified
in the AT parameter.
TOTAL LINKS-SENT
reports the total number of link requests issued by this system to a selected system
because the line-handler process was started.
TOTAL PKTS-SENT
reports the total number of packets sent from this system to a selected system
because the line-handler process was st
arted.
TOTAL LINKS-RCVD
reports the total number of link requests received by this system from a selected
system because the line-handler process was started.
Example 14-31. STATS PROCESS $NCP Command, NETFLOW Option
->STATS PROCESS $NCP, NETFLOW, AT \N1, TO ( 2, 4, 5, 6, 7, 9, 10, 13, 14, 15)
EXPAND Stats Process $NCP, NETFLOW
Sampletime.... JUN 8,2000 20:20:1
NETWORK STATISTICS AT \N1 (003)
TOTAL TOTAL TOTAL TOTAL
SYSTEM LINKS-SENT PKTS-SENT LINKS-RCVD PKTS-RCVD
2 \NODEB 469 1133 102 1132
4 \NODET 0 0 0 0
5 \NODEC 0 0 0 0
6 \NODER 0 0 0 0
7 \NODEA 47 110 8 110
9 \NODEH 6 165 54 114
10 \NODEW 0 0 0 0
13 \NODEX 0 0 0 0
14 \NODET 0 0 0 0
15 \NODE1 0 0 0 0