Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 103
Considerations
configured with SUPERPATH_ON or the multi-CPU path feature will not be
enabled. The configured value can be displayed using the INFO PATH command.
Line LDEVs
displays the LDEV identifiers for all the lines (up to eight) associated with the path.
Trace File Name
the name of the trace file specified in the SCF TRACE command.
Considerations
You can display the status information for several paths with a single STATUS PATH
command by specifying multiple PATH objects using parentheses as:
PATH ( path-name , path-name [ , path-name ] ... )
Examples
This SCF command summarizes the status on path $PATH1:
-> STATUS PATH $PATH1
This SCF command gives a detailed display of the status on path $PATH1:
-> STATUS PATH $PATH1, DETAIL
This SCF command summarizes the status on paths $PATH2 and $PATH3:
-> STATUS PATH ($PATH2,$PATH3)
STATUS LINE Command
The display for a LINE object without the DETAIL option has the format as shown in
Example
14-35:
Name
is the device name of the line.
State
indicates the summary state of the line. The line is in either the STARTED or
STOPPED state.
Example 14-35. STATUS LINE Command
-> STATUS LINE $SWNLCW1
EXPAND Status LINE
Name State Status PPID BPID CIU-Path ConMgr-LDEV
$SWNLCW1 STARTED READY 2, 20 3, 21 A 70