Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 105
STATUS LINE Command
Path LDEV
contains the logical device (LDEV) number of the path associated with this line.
Trace Status
indicates whether the line is being traced.
Clip Status
indicates the state of the communications line interface processor (CLIP) on the
ServerNet wide area network (SWAN) concentrator used by this line.
ConMgr-LDEV
is the logical device (LDEV) number of the concentrator manager (ConMgr)
process. The ConMgr process is part of the WAN subsystem.
STATUS
indicates the status of the line: ready or not ready.
SWAN Track Id
is the configuration track ID of the SWAN concentrator used by this line. Each
SWAN concentrator is assigned a unique configuration track ID.
Clip
indicates which communications line interface processor (CLIP) (0, 2, or 3) on the
SWAN concentrator is used by this line.
Line
indicates which line (0 or 1) in the CLIP on the SWAN concentrator is used by this
line.
Path
indicates which SWAN concentrator path (A or B) is being used by this line to
communicate with the SW
AN concentrator.
IP Address
is the Internet Protocol (IP) address associated with the SWAN concentrator path
(A or B) being used by this line to communicate with the SWAN concentrator. Each
SWAN path is assigned a unique IP address.
Effective line priority
indicates the effective priority of the line.