Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual — 529522-013
14 - 106
STATUS LINE Command
Trace File Name
the name of the trace file specified in the SCF TRACE command.
For an Expand-over-IP, Expand-over-ATM, Expand-over-ServerNet, or Expand-over-
NAM line-handler process, the display for a LINE object with the DETAIL option has
the format as shown in Example
14-37:
PPID
is the primary process ID.
BPID
is the backup process ID.
State
indicates the summary state of the line. The line is either in the ST
ARTED or
STOPPED state.
Path LDEV
contains the logical device (LDEV) number of the p
ath associated with this line.
Trace Status
indicates whether the line is being traced.
Effective line priority
indicates the effective priority of the line.
Detailed State
indicates a more detailed state. T
hese are the detailed states:
ACCEPT
indicates that a switched virtual circuit (SVC) connection has been accepted
from the remote system. This state applies to Expand-over-ATM line-handler
processes that use SVC connections only.
Example 14-37. STATUS LINE, DETAIL Command, LINE Object
-> STATUS LINE $SC151, DETAIL
EXPAND Detailed Status LINE $SC151
PPID............... ( 2, 282) BPID................. ( 3, 282)
State.............. STARTED Path LDEV............ 109
Trace Status....... OFF Effective line priority 1
Detailed State..... CONNECTED Status READY
Detailed Info... None
Trace File Name.... \NODEA.$DATA00.STATUS.TRC