Expand Configuration and Management Manual (H06.21+, J06.10+)

About This Manual
Expand Configuration and Management Manual—529522-013
xxxiv
Part I Contents
Part I Contents
Part I, Getting Started, consists of Sections 1 through 4. Table i summarizes the
contents of Part I.
Part II Contents
Part II, Configuring the Expand Subsystem, consists of Sections 5 through 13. These
sections explain how to configure the various types of Expand line-handler processes.
Table ii summarizes the contents of Part II.
Table i. Summary of Contents—Part I
Section Title Contents
1 Configuration Quick
Start
Provides the basic information required to enable
you to quickly define, start, and modify Expand
line-handler process.
2 Expand Overview
Describes the Expand subsystem’s major features
and capabilities.
3 Planning a Network
Design
Discusses basic network design decisions.
4 Planning for ServerNet
Clusters
Discusses Expand and ServerNet Cluster
configuration considerations and provides
topology examples of ServerNet Clusters
coexisting with other Expand networks.
Table ii. Summary of Contents—Part II
Section Title Contents
5 Configuration Overview
Provides an overview of the Expand subsystem
configuration process.
6 Configuring the Network
Control Process
Explains how to configure and start the network
control process.
7 Configuring Direct-
Connect and Satellite-
Connect Lines
Explains how to configure and start single-line
satellite-connect and direct-connect line-handler
processes.
8 Configuring Expand-
Over-IP Lines
Explains how to configure and start single-line
Expand-over-IP line-handler processes. Includes
information on NonStop TCP/IP, NonStop
TCP/IPv6, and CIP.
9 Configuring Expand-
Over-ATM Lines
Explains how to configure and start single-line
Expand-over-ATM line-handler processes.
10 Configuring Expand-
Over-X.25 Lines
Explains how to configure and start single-line
Expand-over-X.25 line-handler processes.