Expand Configuration and Management Manual (H06.21+, J06.10+)

Expand Configuration and Management Manual — 529522-013
15 - 1
15 Tracing
This section describes the tracing process when the SCF TRACE command is used
with commands available in the PTrace facility. The SCF TRACE command allows you
to select the records that you want written to a disk file. PTrace commands allow you to
select which of those records you want formatted and sent to an output device. The
output device can be a terminal, spooler, or printer.
•
Why Tracing Is Important on page 15-2
•
How to Use Tracing on page 15-2
•
Tracing Using SCF on page 15-3
•
PTrace Command Overview on page 15-5
•
FILTER Command on page 15-6
•
FIND Command on page 15-7
•
FROM Command on page 15-8
•
HEX Command on page 15-8
•
LABEL Command on page 15-9
•
NEXT Command on page 15-9
•
OCTAL Command on page 15-10
•
OUT Command on page 15-11
•
RECORD Command on page 15-11
•
SELECT Command on page 15-12
For general information about PTrace, see the PTrace Reference Manual. For more
information on the SCF TRACE command, see TRACE Command on page 14-112.
Note. For the Expand subsystem, PTrace is primarily an HP internal tool. Because Expand
uses HP-proprietary protocols, internal state information is not provided to customers.