Expand Configuration and Management Manual (H06.21+, J06.10+)

Tracing
Expand Configuration and Management Manual — 529522-013
15 - 10
Example
F-key
is pressed to specify the number of lines to display at the 6530 terminal. Table 15-2
lists the number of lines that are sent when specific function keys are pressed.
Example
?NEXT 15 AFTER 13:01
OCTAL Command
The OCTAL command, when set to ON, prints the data portion of a trace record,
including the record header, in octal format.
ON | OFF
ON enables printing in octal format. OFF disables printing in octal format and
enables printing in hexadecimal format. ON is the default.
Example
?OCTAL ON
Table 15-2. Number of Trace Lines Displayed
F Key Number of Lines F Key Number of Lines
F1 1 F9 9
F2 2 F10 10
F3 3 F11 11
F4 4 F12 12
F5 5 F13 13
F6 6 F14 14
F7 7 F15 15
F8 8 F16 16
OCTAL { ON | OFF }