Expand Configuration and Management Manual (H06.21+, J06.10+)

Expand Configuration and Management Manual — 529522-013
16 - 1
16 Expand Modifiers
The Expand subsystem provides many modifiers to allow you to customize your
network. These modifiers are contained in the profiles. Some modifiers are required,
some are optional, some only appear in certain profiles, and others appear in several
profiles.
This section describes the modifiers that are related to the configuration of Expand
line-handler processes. Modifiers that affect the network control process ($NCP) are
discussed in Section 6, Configuring the Network Control Process.
How to Use This Section
The modifiers described in this section are presented in three different ways to meet
your needs:
•
Required modifiers are listed in Required Modifiers
•
All the Expand modifiers are listed in alphabetical order in Modifier Dictionary.
Each modifier is described in detail.
•
Tables listing all the Expand modifiers and the profiles in which they appear are
provided in Profiles.
Required Modifiers
Required modifiers are modifiers that are necessary for successful network operation.
Not all modifiers are required for all types of Expand line-handler processes.
Table 16-1 lists the required modifiers.
Table 16-1. Required Modifiers (page 1 of 3)
Modifier Description
ASSOCIATEDEV Can be used to associate:
•
The logical device name of a NAM process with an Expand-
over-NAM line-handler process.
•
A NonStop TCP/IP process with an Expand-over-IP line-
handler process.
•
An Asynchronous Transfer Mode (ATM) line with an
Expand-over-ATM line-handler process.
•
The ServerNet monitor process ($ZZSCL) with an Expand-
over-ServerNet line-handler process.
Required by: Exp
and-over-X25, Expand-over-SNA, and
Expand-over-ATM line-handler processes only.
Default: $ZZSCL for Exp
and-over-ServerNet line-handler
processes. There is no default value for Expand-over-NAM,
Expand-over-IP, and Expand-over-ATM line-handler processes.