Expand Configuration and Management Manual (H06.21+, J06.10+)

Subsystem Description
Expand Configuration and Management Manual — 529522-013
17 - 5
Expand Line-Handler Processes
configured to use a particular SNAX/APN line and logical unit (LU). At least one
SNAX/APN line and one Expand line must be configured and started at each end of
the SNA network through which the Expand-over-SNA line-handler processes will
communicate.
Expand-Over-IP Line-Handler Process
The Expand-over-IP line-handler process uses the NonStop TCP/IP subsystem to
provide connectivity to an Internet Protocol (IP) network.
The Expand-over-IP line-handler process is a client to a NonStop TCP/IP process. The
Expand-over-IP process communicates with the NonStop TCP/IP process through the
shared memory of the QIO subsystem.
The NonStop TCP/IP process provides a Guardian file-system interface to the
Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP) in
addition to raw (direct) access to IP. The Expand-over-IP line-handler process uses the
UDP services provided by the TCP/IP process to transmit data across an IP network.
Expand-Over-ServerNet Line-Handler Process
The Expand-over-ServerNet line-handler process uses a pair of NonStop cluster
switches, processor switches, plug-in cards (PICs), fiber-optic cables, and the
ServerNet monitor process ($ZZSCL) to connect to a ServerNet cluster.
Each ServerNet cluster uses at least two NonStop cluster switches for routing; one for
the X-fabric and one for the Y-fabric. For the star topology, introduced with the G06.09
RVU, these switches can support up to eight nodes per switch. For the split-star
topology, introduced with the G06.12 RVU, two switches for each fabric can support up
to 16 nodes (eight nodes per switch). For the tri-star topology, introduced with the
G06.14 RVU, three switches for each fabric can support up to 24 nodes (eight nodes
per switch). For more information on the cluster switches, see the ServerNet Cluster
Manual.
Each switch connects to two processor switches per node. At least two plug-in cards
are required for ServerNet connections between system enclosures in each node. T
wo
fiber-optic cables are required for each node, for attachment to the X and Y cluster
switches. The Expand-over-ServerNet line-handler process uses the NETNAM
protocol to access the NAM interface of the ServerNet cluster monitor process
($ZZSCL).
Note. For more information on the Expand-to-IP interface, see Expand-to-IP Interface on
page 17-53.
Note. The Integrity NonStop NS1000 server does not support ServerNet clusters.
Note. For more information on the Expand-to-NAM interface, see
Expand-to-NAM Interface on
page 17-49.