Expand Configuration and Management Manual (H06.21+, J06.10+)

Expand Configuration and Management Manual — 529522-013
18 - 1
18 Managing the Network
This section explains how to access network resources, set up network security, and
monitor, reconfigure, and control an Expand network.
•
Accessing Network Resources on page 18-1
•
Setting Up Network Security on page 18-7
•
Monitoring Network Activity on page 18-13
•
Reconfiguring the Network on page 18-20
•
Controlling the Network on page 18-26
For more information on the commands described in this section, see:
•
For Expand Subsystem Control Facility (SCF) commands, see Section 14,
Subsystem Control Facility (SCF) Commands.
•
For WAN subsystem SCF commands, see the WAN Subsystem Configuration and
Management Manual.
•
For Kernel subsystem SCF commands, see the SCF Reference Manual for the
Kernel Subsystem.
•
For general SCF commands, see the SCF Reference Manual for H-Series RVUs.
•
For a comparison of the commands provided by the SCF interface to the Expand
subsystem and the SCF interface to the WAN subsystem, see Appendix B, Expand
and WAN SCF Comparison.
Accessing Network Resources
This subsection describes how to use HP commands and utilities to access resources
on remote nodes in an Expand network. Topics explained in this section include:
•
Using TACL to Manage Remote Files on page 18-2
•
Using Disk-File Names on page 18-2
•
Changing Your Default Values on page 18-3
•
Gaining Access to Remote Nodes on page 18-4