Expand Configuration and Management Manual (H06.21+, J06.10+)

Managing the Network
Expand Configuration and Management Manual — 529522-013
18 - 15
Displaying Expand Line-Handler Process
Information
Table 18-2 lists the WAN subsystem SCF commands that display $NCP information.
Displaying Expand Line-Handler Process Information
The SCF interfaces to the Expand and WAN subsystems provide commands that
display information and status information for a selected Expand line-handler process.
Table 18-3 lists the Expand subsystem SCF commands that display general Expand
line-handler process information.
When you use the SCF LISTDEV command to list all the configured Expand line-
handler processes, you can use the subtype displayed to identify the type of Expand
line-handler process.
Table 18-2. WAN SCF Commands for $NCP Information
SCF Command Information Reported
INFO DEVICE $ZZWAN.#NCP Displays the primary and backup processors,
type, record size, object f
ile, and profile used by
$NCP. The DETAIL option can be used to
display device-specific modifiers and modifier
values.
INFO PROFILE $ZZWAN.#ncp_
profile Displays a list of the modifiers and modifier
values contained in the profile used by $NCP.
The profile for $NCP is PEXPNCP.
STATUS DEVICE $ZZWAN.#NCP
Displays the dynamic state, logical device
(LDEV) number, and primary process
identification number (PIN) of $NCP.
Table 18-3. Expand SCF Commands for Expand Line-Handler Processes
SCF Command Information Reported
LISTDEV EXPAND
or
LISTDEV TYPE 63
Displays all the configured Expand line-handler
processes on a system. Informatio
n displayed
includes the logical device name and number,
primary and backup processor and process
identification number (PIN), device type and
subtype, configured RSIZE value, priority level
of the device, and the fully qualified program file
name of the process.
VERSION PROCESS $device_name Displays the version level of the Expand line-
han
dler process.