Expand Configuration and Management Manual (H06.21+, J06.10+)

Troubleshooting
Expand Configuration and Management Manual — 529522-013
20 - 22
Expand-Over-IP Problems
Resolving Expand-Over-IP Wait Problems
If the SCF STATUS LINE command with the DETAIL option displays WAIT in the
Detailed State field, check the Detailed Info field for more detailed error information.
Table 20-12 describes the messages that might be displayed in the Detailed Info field.
Example 20-9. SCF INFO LINE, DETAIL Command (Expand-Over-IP)
-> INFO LINE $IPTAH0, DETAIL
EXPAND Detailed Info LINE $IPTAH0 (LDEV 175)
L2Protocol Net^Ip TimeFactor...... 3 *SpeedK........ NOT_SET
Framesize....... 132 -Rsize........... 3 -Speed........
*LinePriority.... 1 StartUp......... OFF *Delay......... 0:00:00.10
*DownIfBadQuality OFF *QualityThreshold 96 *QualityTimer.. 0:01:00.00
*Txwindow........ 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:00:30.00 *Retryprobe...... 19 *Timerprobe.... 0:00:01.00
*Ass
ociatedev.... $ZTC02 *LineTf.......... 0 *Timerinactivity 0:00:00.00
*IPVer IPV4
*Des
tIpAddr 16.107.189.66 *DestIpPort...... 5744
*Src
IpAddr 16.107.188.54 *SrcIpPort....... 5744
*V6DestIpAddr ::
*V6SrcIpAddr ::
Table 20-12. Messages Displayed in the Detailed Info Field
(Expand-Over-IP)
Message Description
Shared memory system unavailable The QIO subsystem is not available. Check the
st
ate of the QIO subsystem. The line will become
ready when the QIO subsystem becomes available.
Ownership error The Expand-over-IP line-handler process is unable
to switch processors.
An ownership error occurs
when the NonStop TCP/IP process associated with
the Expand-over-IP line-handler process indicates
that it is no longer the primary process, but the line-
handler process is unable to switch processors
because other lines in the multi-line path are active.
(An Expand-over-IP line-handler process and the
NonStop TCP/IP process with which it is associated
must always reside in the same processor.) The
Expand-over-IP line-handler process will not be
able to switch processors until all other lines in the
path are inactive (that is, they do not have socket
connections).
Associate TCP process unavailable The NonStop TCP/IP process associated with the
Exp
and-over-IP line-handler process is not
available. Check the state of the NonStop TCP/IP
process. The line will become ready when the
associated NonStop TCP/IP process becomes
available.