Expand Configuration and Management Manual (H06.21+, J06.10+)
Troubleshooting
Expand Configuration and Management Manual — 529522-013
20 - 25
Expand-Over-ATM Problems
LISTEN The Expand-over-ATM line-handler
process is waiting for switched
virtual circuit (SVC) connection
establishment from the remote
system.
This state is normal. No
recovery is required.
PASSIVE If the Expand-over-ATM line-
han
dler process is configured to
issue passive connect requests,
this state indicates that the line-
handler process is waiting for the
remote Expand-over-ATM line-
handler process to initiate a
connection.
If the Expand-over-ATM line-
han
dler process is configured to
issue active connect requests, this
state indicates that the reconnect
limit has been reached and that the
line-handler process has been
configured to subsequently issue
passive connect requests.
This state is normal. No
recovery is requ
ired.
QUERY A connection has been established
with
the remote Expand-over-ATM
line-handler process, but no data
has been received within the
inactivity interval. The Expand-
over-ATM line-handler process is
sending Probe messages to the
remote Expand-over-ATM line-
handler process to verify that it is
operational.
If the line remains in this
state, the remote (destination)
Expand-over-ATM line-
handler process is down or
there is a network problem.
SETOPT_CALLING This is an internal state that should
not
persist.
Try to restart the line. If this
state persists, contact your
HP representative.
SETOPT_LISTEN This is an internal state that should
not
persist.
Try to restart the line. If this
state persists, contact your
HP representative.
WAIT The Expand-over-ATM line-handler
pro
cess is waiting for another
process or subsystem.
The line remains started but is not
rea
dy for data transfer.
For more specific error
in
formation, see the Detailed
Info field. Recovering from
these types of problems is
described further in
Resolving
Expand-Over-ATM Wait
Problems on page 20-27.
Table 20-14. Detailed States (Expand-Over-ATM) (page 2 of 2)
Detailed State Cause/Effect Recovery