Expand Configuration and Management Manual (H06.21+, J06.10+)

Configuration Quick Start
Expand Configuration and Management Manual — 529522-013
1 - 8
Creating a Single-Line Expand Line-Handler
Process
3. Using the name of the SWAN concentrator with the available WAN line from
Step 2a, determine the names of the preferred and alternate NonStop TCP/IP
processes configured for the SWAN concentrator.
-> INFO ADAPTER $ZZWAN.#concname
The command display shows the names of the preferred and alternate NonS
top
TCP/IP processes (or TCP6SAM processes for NonStop TCP/IPv6 environments)
in the *TCPIP Name and *ALTTCPIP Name fields, respectively. An example of an
SCF INFO ADAPTER command is shown in Example
1-2. The preferred and
alternate NonStop TCP/IP process names are shown in boldface type.
4. Using the names of the preferred and alternate NonStop TCP/IP or TCP6SAM
processes shown in the SCF INFO ADAPTER display, determine in which
processors the preferred and alternate processes are running.
-> STATUS PROCESS $tcip_process_preferred
-> STATUS PROCESS $tcip_process_alternate
The command display shows the number of the processor where the NonStop
TCP/IP or TCP6SAM process is running in the PPID field. The first number in
parentheses is the processor number. An example of two SCF STATUS PROCESS
commands is shown in Example
1-3 on page 1-9. The processor numbers are
shown in boldface type.
Example 1-2. SCF INFO ADAPTER Command
WAN Manager Detailed Info Adapter \NODEA.$ZZWAN.#S01
*TrackId........... XR4T7D *TCPIP Name....... $ZB01C
*ALTTCPIP Name..... $ZB018 Concentrator Type. SYNC
KERNELCODE......... $SYSTEM.CSS00.C7953P00
*SNMPCODE.......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address.... 172.016.035.117
ALTHOSTIP Address.. 172.016.045.119
GATEWAYIP Addr..... 000.000.000.000
ALTGATEWAYIP Addr.. 000.000.000.000
SUBNETMASK......... %HFFFFFF00
ALTSUBNETMASK...... %HFFFFFF00