Expand Configuration and Management Manual (H06.21+, J06.10+)

Expand Configuration and Management Manual — 529522-013
B - 1
B Expand and WAN SCF
Comparison
This appendix compares the commands provided by the SCF interface to the Expand
subsystem with the commands provided by the SCF interface to the WAN subsystem.
For a general comparison of the two SCF interfaces, see Section 14, Subsystem
Control Facility (SCF) Commands.
Command Comparison
Table B-1 provides a command-to-command comparison of Expand SCF and WAN
SCF commands and explains which command to use to perform a specific task.
Table B-1. Expand and WAN SCF Command Comparison (page 1 of 6)
Expand
Subsystem SCF
Command
WAN
Subsystem SCF
Command Command Function
ABORT ABORT Expand SCF:
•
Use the ABORT LINE command to terminate
activity on a selected Expand line.
•
Use the ABORT PATH command to terminate
activity on all the lines associated with a
selected Expand path.
WAN SCF:
•
The ABORT command does not operate on
Expand line-handler processes or on the
network control process ($NCP).
ADD Use the WAN subsystem ADD DEVICE
co
mmand to create Expand line-handler
processes and the network control process
($NCP).
Use the WAN subsystem ADD PROFILE
co
mmand to create profiles for Expand line-
handler processes and the network control
process ($NCP).