Introduction to Networking for NonStop NS-Series Servers (H06.03+, J06.03+)

Networking on Integrity NonStop Servers
Introduction to Networking for HP Integrity NonStop NS-Series Servers—529874-003
1-4
Interoperability With NonStop S-Series and NonStop
K-Series Servers
Networking software available only on the NonStop S-series server (not available on
the Integrity NonStop server) includes:
•
6100 TINET Multi-PT Supervisor-PDG
•
6100 UTS-40 Multi-PT Supervisor
•
6100 UTS-40 Multi-PT Tributary
•
6100 VIP Multi-PT Supervisor
•
Domain Name Server (DNS) (T6021) (Replaced by DNS 9.x)
•
Enform
•
Fiber Optic Extension (FOX) Gateway
•
Multilan Access method and File Server
•
NonStop IPX/SPX
•
Novell LAN Print Spooler
•
Parallel Library TCP/IP (functionality available in NonStop TCP/IPv6 on Integrity
NonStop servers)
•
TANDEM NBT NETBIOS for IPX
•
TANDEM NBT NETBIOS for TCP
Interoperability With NonStop S-Series and
NonStop K-Series Servers
From an Integrity NonStop server, you can communicate directly with a
NonStop K-series server by using Expand; you can also communicate indirectly with a
NonStop K-series server through a NonStop S-series server.
From an Integrity NonStop server, you can communicate with a NonStop S-series
server by using either Expand or ServerNet clustering.
Figure 1-1
on page 1-5 shows interoperability between multiple NonStop servers.
Note. Not all Integrity NonStop servers support ServerNet clustering. For more information,
see the planning guide for your server model (for example, the Integrity NonStop NS1000
Planning Guide.