NonStop NS2200 Series Planning Guide

1
Only a 36U seismic rack is supported for a NonStop NS2200ST system. This cabinet should never be used without first
bolting it to the floor.
2
See “IP and Telco CLIM CG Coexistence Limits ” (page 158) for information about coexistence limits for IP and Telco CLIM
CGs.
Figure 32 (page 110) shows the rear view of an NonStop NS2200T system in a G2 42U commercial
grade cabinet and a NonStop NS2200ST system in the 36U seismic rack. Both systems have two
blade elements.
Figure 32 Example of NonStop NS2200T and NonStop NS2200ST Systems in G2 Rack and Cabinet
NonStop NS2200T and NonStop NS2200ST Hardware
Some variation of enclosure combinations is possible within the modular cabinets of a NonStop
NS2200T or NS2200ST system. The applications and purpose of any NonStop NS2200 series
system determine the number and combinations of hardware within a modular cabinet.
Standard Hardware for a NonStop NS2200T and NS2200ST system includes:
• “Commercial Modular Cabinets (NonStop NS2200T)” (page 111)
• “Seismic Rack (NonStop NS2200ST System Only)” (page 111)
• “Blade Element (DC-Powered)” (page 111)
110 NonStop NS2200T and NS2200ST Systems Overview