NonStop NS2200 Series Planning Guide

Heat Dissipation Worksheet for NonStop NS2200T Racks
To calculate the heat dissipation for each rack, use the worksheet in Table 9 (page 140).
Table 9 Heat Dissipation Worksheet for NonStop NS2200T Rack
Heat Dissipation Worksheet for Rack Number ______
Total (BTU/hour)Unit Heat (BTU/hour) Maximum
Number
InstalledEnclosure Type
239 x (fuse panel load /160)
2
Fuse panel
1
1686Blade Element (8 GB)
1747Blade Element (16 GB)
1802Blade Element (32 GB)
1112VIO enclosure
819G6 Storage CLIM T
819G6 IP/Telco CLIM T
546Gen8 Storage CLIM T
539Gen8 IP/Telco CLIM T
614
SAS Disk Enclosure (no
disks)
31Disk drive 10k rpm
24Disk drive 15k rpm
20.5
200GB SAS 2.5” SSD,
Gen1
20.5
200GB SAS 2.5” SSD,
Gen2
51160 DAT unit
137CG Maintenance switch
----Total Heat (BTU/hour)
1
Maximum value. Assumes full load per side of 70W.
2
Fuse panel load is the total nominal current on both sides
Power Load Worksheet, NS2200T
Power and current specifications for racks are the sum of the values for each enclosure that are
installed in the rack. Use the worksheet in Table 10 (page 140) to calculate the power load for each
rack and to indicate the breaker panel and fuse panel configurations.
Table 10 Power Load Worksheet for NonStop NS2200T Rack
Power Load Worksheet for Rack Number ______
Fuse Size
Fuse Panel
1
Subtotal
Watts per
Enclosure
Number of
EnclosuresEnclosure Type
----494Blade Element (8 GB)
----512Blade Element (16 GB)
----528Blade Element (32 GB)
326VIO Enclosure
140 Specifications for NonStop NS2200T Systems