NonStop NS2200 Series Planning Guide

Two Storage CLIMs, Two Disk Enclosures
This illustration shows example cable connections between the two Storage CLIMs, two disk
enclosure configuration:
Figure 42 Two Storage CLIMs, Two SAS Disk Enclosure Configuration
To disk enclosure SAS portFrom CLIM port
Disk enclosure 1, I/O module 1, P1 or InCLIM 1, Slot 2–1E
Disk enclosure 2, I/O module 1, P1 or InCLIM 1, Slot 2–2E
Disk enclosure 1, I/O module 2, P1 or InCLIM 2, Slot 2–1E
Disk enclosure 2, I/O module 2, P1 or InCLIM 2, Slot 2–2E
This table lists the Storage CLIM, LUN, and bay identification for the factory-default system disk
locations in the configuration of two Storage CLIMs and two disk enclosures. In this case, $SYSTEM,
$DSMSCM, $AUDIT, and $OSS are configured as mirrored SAS disk volumes:
Backup and Mirror CLIMPrimary and Mirror-Backup CLIMDisk Volume Name
100.2.3.3100.2.3.1$SYSTEM
100.2.3.3100.2.3.1$DSMSCM
100.2.3.3100.2.3.1$AUDIT
100.2.3.3100.2.3.1$OSS
1
1
If you have ordered $OSS, you need a 4 pair disk configuration.
For an illustration of the factory-default slot locations for a disk enclosure, see Section (page 152).
Storage CLIM CG and Storage CLIM T Devices 153