NonStop NS2200 Series Planning Guide

New and Changed Information in 663747-003
• Two seismic racks are now supported: the original seismic rack and the seismic rack R2.
Changes have been made throughout “Specifications for NonStop NS2200ST Systems” to
support the new rack. The changes are indicated with change bars.
• The R5000 UPS and ERM are now supported for single-phase power on NonStop NS2200
series systems. Changes have been made throughout these sections:
◦ “Site Preparation Guidelines for NonStop NS2200 Systems”
◦ “System Installation Specifications for NonStop NS2200 Systems”
◦ “Hardware Configuration in NonStop NS2200 Cabinets”
• Solid state drives (SSD) are supported as of J06.13.
• These illustrations have been updated to show the Extended Runtime Module (ERM) at the
bottom of the rack:
◦ Figure 51 (page 184)
◦ Figure 52 (page 184)
◦ “Example of Top AC Power Feed With Three-Phase UPS ” (page 69)
◦ “Example of Bottom AC Power Feed With Three-Phase UPS” (page 70)
• Updated “Cable Types, Connectors, Lengths, and Product IDs” (page 172) with additional
CAT6 Ethernet cables.
• Updated details for CLIM to SAS enclosure cable in “Cable Length Restrictions” (page 173).
• Added Appendix E: “Site Power Cables — Carrier Grade” (page 180).
New and Changed Information in the Previous Edition
A new modular single-phase PDU for North America and Japan is now supported. Changes have
been made to “System Installation Specifications for NonStop NS2200 Systems” (page 56) to
support the new PDUs.
Document Organization
ContentsSection
Part I: NonStop NS2200 Series System
This chapter provides an overview of the servers in the
NonStop NS2200 series.
Types of NonStop NS2200 Systems (page 22)
Part II: NonStop NS2200 Series Commercial System
This chapter provides an overview of the NonStop NS2200
commercial system.
NonStop NS2200 System Overview (page 24)
This chapter outlines topics to consider when planning or
upgrading the installation site for the NonStop NS2200
system.
Site Preparation Guidelines for NonStop NS2200 Systems
(page 50)
This chapter provides the installation specifications for a
fully populated NonStop NS2200 enclosure.
System Installation Specifications for NonStop NS2200
Systems (page 56)
This chapter describes the guidelines for implementing the
NonStop NS2200 modular hardware.
System Configuration Guidelines for NonStop NS2200
Systems (page 88)
16