NonStop NS2200 Series Planning Guide

IP Addresses
NonStop NS2200 series servers require Internet protocol (IP) addresses for these components that
are connected to the dedicated service LAN:
• VIO enclosure logic boards
• Maintenance switches
• System consoles
• CLIM maintenance interfaces (eth0)
• CLIM iLOs
• Blade iLOs
• iPDUs in Intelligent racks
• UPSs (optional)
These components have default IP addresses that are preconfigured at the factory. You can change
these preconfigured IP addresses to addresses appropriate for the LAN environment:
Used ByDefault IP AddressGroup.Module.SlotComponent
OSM Low-Level Link192.168.36.202100.2VIO enclosure
192.168.36.203100.3
OSM Service Connection192.168.36.21N/AMaintenance switch
(rack-mounted)
192.168.36.22 -
192.168.36.30
N/AMaintenance switch
(ProCurve) (Additional
switches)
192.168.36.12 -
192.168.36.20
N/AMaintenance switches
(more than 10 switches)
192.168.42.11N/AiPDU in rack 1, front
mounting rail (Intelligent
rack only)
192.168.42.12N/AiPDU in rack 1, rear
mounting rail (Intelligent
rack only)
192.168.42.21N/AiPDU in rack 2, front
mounting rail (Intelligent
rack only)
192.168.42.22N/AiPDU in rack 2, rear
mounting rail (Intelligent
rack only)
192.168.42.31N/AiPDU in rack 3, front
mounting rail (Intelligent
rack only)
192.168.42.32N/AiPDU in rack 3, rear
mounting rail (Intelligent
rack only)
192.168.36.1N/APrimary system console
(rack-mounted or
stand-alone)
OSM Low-Level Link
OSM Service Connection
192.168.36.2N/ABackup system console
(rack-mounted only)
Dedicated Service LAN 167