NonStop NS2200 Series Planning Guide

Used ByDefault IP AddressGroup.Module.SlotComponent
192.168.36.5N/AUp to two additional
system consoles
(rack-mounted only)
192.168.36.6
OSM Service ConnectionCLIM Maintenance
Interfaces (eth0)
192.168.36.41CLIM at 100.2.3.1
192.168.36.42CLIM at 100.2.3.2
192.168.36.43CLIM at 100.2.3.3
192.168.36.44CLIM at 100.2.3.4
192.168.36.51CLIM at 100.2.4.1
192.168.36.52CLIM at 100.2.4.2
192.168.36.53CLIM at 100.2.4.3
192.168.36.54CLIM at 100.2.4.4
The default DNS name is
SYSNAME-clim-name-iLO
Assigned by Dynamic Host
Configuration Protocol
(DHCP) server on the
NonStop system console
CLIM iLOs
Integrated Lights-Out
Management Processor (iLO
MP)
For more information, see
the HP Integrity iLO 2
Operations Guide.
Assigned by DHCP server on
the dedicated service LAN
N/ABlade element iLO
The default DNS name is
SYSNAME-CPUnumber-iLO
OSM Service Connection192.168.36.31N/AUPS (rack-mounted
NS2200 commercial
system only)
192.168.36.32
TCP/IP processes for OSM:
OSM Service ConnectionSee “Dedicated Service LAN
Links” (page 169)
N/A$ZTCP0
$ZTCP1
Ethernet Cables
Ethernet connections for a dedicated service LAN require CAT 5e or CAT 6 unshielded twisted-pair
(UTP) cables.
SWAN Concentrator Restrictions
NOTE: SWAN and SWAN 2 concentrators are only supported on the NonStop NS2200
commercial system. SWAN/SWAN 2 concentrators can be connected to an IP CLIM or the 10/100
Ethernet ports on a VIO enclosure with these restrictions:
• Isolate any ServerNet wide area networks (SWANs) on the system. The system must be
equipped with at least two LANs: one LAN for SWAN/SWAN 2 concentrators and one for
the dedicated service LAN.
• Most SWANs are configured redundantly using two or more subnets. Those subnets also must
be isolated from the dedicated service LAN.
• Do not connect SWANs on a subnet containing a DHCP.
168 Maintenance and Support Connectivity